Asbestos Testing Service
AsbestosServices.com now offers an asbestos testing service
that allows you to discover whether asbestos is present in any
suspected materials. This service is open to commercial and
domestic customers.
Please note that there are precautions that you should take
before attempting to sample any material thatis suspected of
containing asbestos, as certain materials will release asbestos
fibres into the air when broken or disturbed.
The instructions below should be considered the
minimum precautions you should take when sampling material
suspected of containing asbestos. If in doubt, please call us
for free advice.
If the material you are
considering sampling looks like a sprayed finish, particularly
if it is insulating material on pipework, boilers or celings,
do not sample this yourself.
Special precautions are required for sampling this
material.
Disturbing lagging that contains asbestos is extremely
dangerous and should only be carried by qualified
individuals.
- Dampen or wet the material
- Use pliers, with the inside edges protected
with a baby-wipe to break off a small thumbnail sized
sample
- Place the sample (and the baby wipe) into a
sealable polythene bag - such as a sandwich
bag
- Place the bagged sample inside another sealable
bag
- Attach a label to the bag identifying the
sample type (ceiling tile, fire board, etc) and your name
and address
- Seal the area of the sampled material with duct
tape or paint to avoid fibre release
- Clean any tools used with cold
water
When you have your double-bagged sample, you may send (by
courier) or bring it to us at the following address, together
with your payment of £34.50 including VAT at 15% per
sample:
| Address: |
Energy &
Environmental Surveys Ltd
Unit 3 Radway Industrial
Estate
Radway Road
Solihull
West Midlands
B90 4NR
|
| Telephone: |
0121 711
7110 |
| Fax: |
0121 711
7900 |
| Email: |
|
PLEASE MAKE CHEQUES PAYABLE
TO ENERGY & ENVIRONMENTAL
SURVEYS LTD
|
IMPORTANT NOTICE
|
|
If sending samples through
the post, it is essential that the samples are
double-bagged in sealable polythene bags and
placed in strong packaging marked "Laboratory
Samples - Could Contain Asbestos"
|
Your sample will be processed by one of our selected UKAS
approved asbestos testing laboratories. It usually takes a few
days for us to get the results back.
You will be given a certificate that identifies whether
asbestos is present in the sample and also identifying the type
of asbestos that's present.
In most cases, asbestos containing materials can safely be
left in place, as there will be little or no risk of fibre
release.
However, if your sample is found to contain Amosite (brown)
or Crocidolite (blue) asbestos, then you might need to consider
taking further action to reduce the risk of exposure to
fibres.
We will be pleased to advise on the various options
available to you, should you require.
Using qualified asbestos and building surveyors in any
asbestos removal project will save you money and ensure that
the work is completed in accordance with the strict regualtions
concerning asbestos removal and disposal.
|